YASKAWA NX100 User Manual

1 Introduction
1.2 Programming Pendant
1-9
149235-1CD
RE-CSO-A031
[MAIN MENU]
Displays the main menu.
If this button is pressed while the main menu is displayed, the main menu
disappears.
[SHIFT] + [MAIN MENU]
While a window opens, the window is switched in the following order:
Window → Sub-menu → Main menu
[SERVO ON READY]
Enables the servo power supply to be turned ON.
Press this button to enable the servo power supply to be turned ON if the
servo power supply is shut OFF by the emergency stop or overrun signal.
When this button is pressed:
• In the play mode, the servo power supply is turned ON if the safeguard-
ing is securely closed.
• In the teach mode, the SERVO ON lamp flashes and the servo power
supply is turned ON when the Enable switch is ON.
• The SERVO ON lamp is lit while the servo power is ON.
[ASSIST]
Displays the menu to assist the operation for the currently
displayed window.
Pressing this button with [SHIFT] or [INTERLOCK] displays the help
guidance for the operation.
• [SHIFT] + [ASSIST]
The function list of key combinations with [SHIFT] appears.
• [INTERLOCK] + [ASSIST]
The function list of key combinations with [INTERLOCK] appears.
[BACK SPACE]
Deletes the last character while typing characters.
MAIN
MENU
SERVO
ON
READY
ASSIST
!?
BACK
SPACE
33 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C