YASKAWA NX100 User Manual

9 Arc Welding Application
9.13 Power Source Condition File Initial Value
9-104
149235-1CD
RE-CSO-A031
POWER SOURCE NO.: 15
POWER SOURCE NAME:
MOTOWELD-S350-AJ2/3
COMMENT: STC CONTROL
POWER SUPPLY: independent
SHIELDING GAS: CO2
WIRE DIA.: 1.2mm
WIRE STICKOUT: 15mm
WIRE ANTI-STICKING: 0.3sec
ARC FAILURE STOP: 0.6sec
POWER SOURCE NO.: 16
POWER SOURCE NAME:
MOTOWELD-S350-AJ2/3
COMMENT: STC CONTROL
POWER SUPPLY: independent
SHIELDING GAS: MAG
WIRE DIA.: 1.2mm
WIRE STICKOUT: 15mm
WIRE ANTI-STICKING: 0.3sec
ARC FAILURE STOP: 0.6sec
CURRENT VOLTAGE CURRENT VOLTAGE
RANGE: positive
ADJ.: 1.00
RANGE: positive
ADJ.: 1.00
RANGE: positive
ADJ.: 1.00
RANGE: positive
ADJ.: 1.00
REF.
(V)
MEA.
(A)
REF.
(V)
MEA.
(V)
REF.
(V)
MEA.
(A)
REF.
(V)
MEA.
(V)
1.00 100 2.10 18.0 1.00 95 1.30 16.0
2.00 140 3.20 20.0 2.00 150 2.10 18.0
3.50 190 5.00 23.0 3.50 190 3.70 21.0
5.00 230 7.10 26.5 5.00 240 6.40 26.0
7.00 270 10.80 33.0 7.00 270 10.10 32.5
10.00 350 0.00 0.0 9.00 350 0.00 0.0
0.00 0 0.00 0.0 0.00 0 0.00 0.0
0.00 0 0.00 0.0 0.00 0 0.00 0.0
447 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C