Cisco Catalyst 3650 Series User Manual

Examples
This example shows how to map the interface of VLAN 20 to the SVI of VLAN 18:
Device# configure terminal
Device# interface vlan 18
Device(config-if)# private-vlan mapping 20
Device(config-vlan)# end
This example shows how to permit routing of secondary VLAN traffic from secondary VLANs 303 to 305
and 307 through VLAN 20 SVI:
Device# configure terminal
Device# interface vlan 20
Device(config-if)# private-vlan mapping 303-305, 307
Device(config-vlan)# end
You can verify your settings by entering the show interfaces private-vlan mapping privileged EXEC
command.
Related Commands
DescriptionCommand
Displays private VLAN mapping information for the VLAN
switch virtual interfaces (SVIs).
show interfaces private-vlan mapping
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1026
private-vlan mapping

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)