DescriptionField
Number of MD5 digest errors.
Digest errors increment whenever the MD5 digest in
the summary packet and the MD5 digest of the
received advertisement calculated by the device do
not match. This error usually means that the VTP
password in the two devices is different. To solve this
problem, make sure the VTP password on all devices
is the same.
These errors indicate that the device is filtering
incoming advertisements, which causes the VTP
database to become unsynchronized across the
network.
Number of configuration digest errors
Number of Version 1 errors.
Version 1 summary errors increment whenever a
device in VTP V2 mode receives a VTP Version 1
frame. These errors indicate that at least one
neighboring device is either running VTP Version 1
or VTP Version 2 with V2-mode disabled. To solve
this problem, change the configuration of the devices
in VTP V2-mode to disabled.
Number of V1 summary errors
Number of VTP pruning messages sent on the trunk.Join Transmitted
Number of VTP pruning messages received on the
trunk.
Join Received
Number of VTP summary messages received on the
trunk from devices that do not support pruning.
Summary Advts Received from non-pruning-capable
device
This is an example of output from the show vtp status command. The table that follows describes each field
in the display.
Device> show vtp status
VTP Version capable : 1 to 3
VTP version running : 1
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 2037.06ce.3580
Configuration last modified by 192.168.1.1 at 10-10-12 04:34:02
Local updater ID is 192.168.1.1 on interface LIIN0 (first layer3 interface found
)
Feature VLAN:
--------------
VTP Operating Mode : Server
Maximum VLANs supported locally : 1005
Number of existing VLANs : 7
Configuration Revision : 2
MD5 digest : 0xA0 0xA1 0xFE 0x4E 0x7E 0x5D 0x97 0x41
0x89 0xB9 0x9B 0x70 0x03 0x61 0xE9 0x27
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1042
show vtp
To Next Page
Loading...
Need help?
General
