Cisco Catalyst 3650 Series User Manual

Table 58: show vtp status Field Descriptions
DescriptionField
Displays the VTP versions that are capable of
operating on the device.
VTP Version capable
Displays the VTP version operating on the device.
By default, the device implements Version 1 but can
be set to Version 2.
VTP Version running
Name that identifies the administrative domain for
the device.
VTP Domain Name
Displays whether pruning is enabled or disabled.
Enabling pruning on a VTP server enables pruning
for the entire management domain. Pruning restricts
flooded traffic to those trunk links that the traffic must
use to access the appropriate network devices.
VTP Pruning Mode
Displays whether VTP traps are sent to a network
management station.
VTP Traps Generation
Displays the MAC address of the local device.Device ID
Displays the date and time of the last configuration
modification. Displays the IP address of the device
that caused the configuration change to the database.
Configuration last modified
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1043
show vtp

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)