NEC Xen IPK - Page 103

Xen IPK Programming Manual
1-1-48, Access Code (3-Digit) Assignment DRAFT 3 Chapter 1 – 83
Doc. No.: 8194 - Release 2.0 December 2004
N
1. Select options from the list of function numbers in Memory Block 1-1-46 Access Code (1-Digit) Assignment, and
assign a 3-digit Access Code.
• When a function is assigned a 1-digit Access Code or 2-digit Access Code, 3-digit Access Codes (with the same
first digit) become invalid (i.e., if a function is assigned to Access Code 5, Access Codes 50~59, 5, and 5#
cannot be used.)
2. A station number is not assigned in this Memory Block.
3. All items except function number 001 (Station Number) in 1-digit assignment are valid in this block.
4. Four groups of Access Code Tables can be used. 0~9, , and # are the third digit Access Codes that are assigned in
the third digit tables.
5. Before using this function, assign function numbers 301~304 (Table No. for third digit) in Memory Block 1-1-47
Access Code (2-Digit) Assignment.
6. To program Access Code 811 for Trunk Group 02:
• Use Memory Block 1-1-47 Access Code (2-Digit) Assignment to assign function 301 to 81.
• Set 3rd digit Table No. 01 dial number 1 to function 102.
Numbering Plan (3-Digit)3rd Digit Table No. 01
Dial No. Function Number
0 101 (Trunk Group 01)
1 102 (Trunk Group 02)
2 103 (Trunk Group 03)
3 104 (Trunk Group 04)
4 105 (Trunk Group 05)
::
9 110 (Trunk Group 10)
Numbering Plan (2-Digit)
Dial No. Function Number
81 301(3rd Dgt Table 01)
82 302(3rd Dgt Table 02)
83 303(3rd Dgt Table 03)
84 304(3rd Dgt Table 04)