NEC Xen IPK - Automatic Day;Night Mode by Day of Week Selection

68 – Chapter 1 DRAFT 3 Automatic Day/Night Mode by Day of Week Selection, 1-1-32
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0 December 2004
1-1-32
System Mode
1
Submode
1
Data No.
32
PC Programming
+ BM
Automatic Day/Night Mode by
Day of Week Selection
General Description
Use this Memory Block to select either Pattern 1 or Pattern 2 Day/Night Mode start times for
each day of the week. Memory Block 1-1-27 Automatic Day/Night Mode Switching Time
Assignment sets Day/Night Mode start times for Pattern 1 and Pattern 2 to switch the system
between Day Mode and Night Mode.
Display
Settings
LK 1 LK 2 LK 3 LK 4
There is no
default setting.
SunMonTueWed
LK 5 LK 6 LK 7 LK 8
Thu Fri Sat
Programming Procedures
1
Go off-line.
2
Press LK1 + LK1 + CB to access the Memory Block.
3
Press the corresponding CO/PBX line key to change the data option.
Each time a CO/PBX line is pressed, the LED indication changes from Pattern 1 to
Pattern 2.
Default Values
Sunday ~ Saturday = Pattern 1
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-27 Automatic Day/Night Mode Switching Time Assignment
1-8-07 Class of Service (Attendant) Feature Selection 1
4-09 Telephone to Tenant Assignment
4-17 Station to Class of Service Feature Assignment
3 2 : D / N B Y D A Y
T I M E D I S P L A Y
Data
No. Title
CO/PBX
Line LED
Off On
Data
Day/Night
Automatic
Switching
Pattern 1
Day/Night
Automatic
Switching
Pattern 2