NEC Xen IPK - Related Programming

Xen IPK Programming Manual
1-7-06, External Paging Timeout Selection DRAFT 3 Chapter 1 – 211
Doc. No.: 8194 - Release 2.0 December 2004
3
Use the dial pad to enter the time required.
Note:
Jto move cursor left.
Lto move cursor right.
Setting Data (Allow): Class 1 to Class 4: 000 to 999 sec
NOTE: CCIS Network use Class 1 only.
Default values:
Class 1 to Class 4 = 300 secs
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-2-00 Internal Paging Timeout Selection
1-7-02 External Speaker Chime Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
Programming Procedures (Continued)