NEC Xen IPK - DIT Holiday Mode Enable

394 – Chapter 1 DRAFT 3 DIT Holiday Mode Enable, 3-63
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0 December 2004
3-63
System Mode
3
Submode
—
Data No.
63
PC Programming
+ BCT
DIT Holiday Mode Enable
General Description
This Memory Block is used to enable Holiday Mode checking on tenant groups for incoming
DIT calls.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
Yes
No 10s 20s
LK 5 LK 6 LK 7 LK 8
30s 40s 50s 60s
Programming Procedures
1
Go off-line.
2
Press LK3 + N + FCto access the Memory Block.
3
Press the corresponding CO/PBX line key to change the data option.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K~I to enter numeric data
Rto go to the next CO/PBX Line No.
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
4-09 Telephone to Tenant Assignment
N
1. During Holiday Mode and Night Mode Ring Assignments apply, regardless of time or day or night.
2. Holiday Mode can be set on a System Wide or Tenant Specific basis.
3. DIT Holiday Mode only effects CO/PBX calls to extensions set with DIT facility.
1 1 / 6 3 : H O L D I T Y S
T I M E D I S P L A Y
CO/PBX
No.
(01~64)
Data
No.
Title
Setting
Data