NEC Xen IPK - Section 4 Programming System Data

December 2004 NEC Business Solutions Ltd
29 – Chapter 1 DRAFT 3 Multiline Terminal Programming
Doc. No.: 8194 - Release 2.0 December 2004
SECTION 4
PROGRAMMING
SYSTEM DATA
This section provides detailed instructions for programming individual
Memory Blocks. The Memory Blocks are listed numerically. For each
Memory Block, the following information is provided.
 General Description provides a brief explanation of the function of the
Memory Block.
 Display represents the default information displayed in the Multiline
Terminal LCD during programming.
 Settings (when applicable) provides the information that is entered
using the line keys on the Multiline Terminal.
 Programming Procedures provides detailed procedures for
programming the Memory Block.
 Related Programming (where applicable) provides a list of associated
Memory Blocks that may need to be programmed.
 Notes provides additional information related to programming the
Memory Block.
LK 8 Special Mode
Data
No.
Memory Block Name Default Value Programming Values
1 ROM Version Confirmation Refer to ROM Version Confirmation on page 1-513.
2 System Speed Dial Memory Clear Refer to System Speed Dial Memory Clear on page 1-515.
3 Station Speed Dial Memory Clear Refer to Station Speed Dial Memory Clear on page 1-516.
8-800 Second Initialisation Refer to Second Initialisation on page 1-517.
— Clock/Calendar Setting N/A N/A