NEC Xen IPK - Tie Line Code Restriction Assignment

110 – Chapter 1 DRAFT 3 Tie Line Code Restriction Assignment, 1-1-69
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0 December 2004
1-1-69
System Mode
1
Submode
1
Data No.
69
PC Programming
+ AC
Tie Line Code Restriction
Assignment
General Description
Use this Memory Block to assign Restriction/No Restriction to outgoing Tie line dialled digits.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
No Restric-
tion (NO)
Restriction
(YS)
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1
Go off-line.
2
Press LK1 + LK1 + FI to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option. Default Values
Restriction
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
Refer to Section 6 Code Restriction in this chapter.
N
When Tie lines are assigned code restriction, the Access Code used to dial out of the distant system must be entered in
front of the dialled number in the 8-Digit Matching Tables.
6 9 : T I E R E S T = Y S
T I M E D I S P L A Y
Data
No.
Title
1~7
Setting
Data