NEC Xen IPK - ROM Version Confirmation

8-1, ROM Version Confirmation DRAFT 3 Chapter 1 – 513
Xen IPK Programming Manual
Doc. No.: 8194 - Release 2.0 December 2004
8-1
System Mode
8
ROM
1
Data No.
—
PC Programming
+ BCM
ROM Version Confirmation
General Description
Use this Memory Block to confirm the program version without removing the card from the KSU.
Display
Programming Procedures
1
Go off-line.
2
Press LK8 + LK1 to access the Memory Block.
3
Press the corresponding CO/PBX line key to change the data option.
Note: Use the following to enter data:
S to change from one operating system to the next operating system
Enter
A~H = Frame No. 1~3, Slot No 1~8
I = Slot Number A
K = Slot Number B
S = Slot Number C
4
Press Nand the type of unit, in the order of slot number and ROM version is displayed each time a CO/PBX line key
is pressed.
S P 1 7 7 : M M C = 0 1
1 - 0 C : C P U = 1 . 0 0
Software Package Name
Unit Name
Frame
No.
1~3
ROM Version
Slot No.
C, 1~8
A, B
ROM Version of
CPU
0 9 : = 0 0
1 — 0 1 : B R T 4 = 0 0