NEC Xen IPK - Attendant Transfer Selection During Live Record

202 – Chapter 1 DRAFT 3 Attendant Transfer Selection During Live Record, 1-6-08
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0 December 2004
1-6-08
System Mode
1
Submode
6
Data No.
08
PC Programming
+ BTD
Attendant Transfer Selection
During Live Record
General Description
This Memory Block controls the behavior of the Attendant DSS/BLF transfer while the Attendant
is engaged in a live recording operation. The call is either transferred to the DSS/BLF extension
or the voice mail box of the DSS/BLF extension. If Yes is selected, the call is transferred to the
DSS/BLF extension. If No is selected, the live record session is addressed to that DSS/BLF
extension (no transfer).
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
No
Yes
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1
Go off-line.
2
Press LK1 + LK6. UseJto move cursor to the second Data No. position and pressHto access the Memory Block.
3
Press the corresponding CO/PBX line key to change the data option.
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
0 8 : D S S S E L Y S
T I M E D I S P L A Y
Data
No.
Setting
Data
Title