NEC Xen IPK - COM Port Baud Rate Setting Assignment

248 – Chapter 1 DRAFT 3 COM Port Baud Rate Setting Assignment, 1-8-35
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0 December 2004
1-8-35
System Mode
1
Submode
8
Data No.
35
PC Programming
+ CSS
COM Port Baud
Rate Setting Assignment
General Description
Use this Memory Block to define the baud rates for all three COM ports individually.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
4.8 9.6 19.2
38.4
Programming Procedures
1
Go off-line.
2
Press LK1 + LK8 + CE to access the Memory Block.
3
Use the Line keys to select the baud rate for each COM port.
Default Values
COM 1 = 38.4
COM 2 = 4.8
COM 3 = 9.6 (Not Used)
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-5-13 Printer Connected Selection
N
COM 1 = PC Programming
COM 1 = LCR
COM 2 = Station Message Detail Recording (SMDR)
COM 3 = Automatic Call Distribution
3 5 : B D R T 1 = 3 8 . 4
T I M E D I S P L A Y
Data
No.
Title
Setting
Data