NEC Xen IPK - Delayed Ringing

December 2004 NEC Business Solutions Ltd
566 – Chapter 2 DRAFT 3 Section 2, Programming Guide Tables
Doc. No.: 8194 - Release 2.0 December 2004
Delay Announcement
Menu Access
Keyboard Shortcut
System Data Name Memory Block
z
+BA  Access Code (1-, 2-, 3-Digit) Assignment
1-1-46/47/48
(Item 501)
z
+AR
First Delay Announcement Start Time Selection 1-1-71
z
+AR
First Delay Announcement Repeat Selection 1-1-72
z
+AR
First to Second Delay Announcement Interval Time Selection 1-1-73
z
+AR
Second Delay Announcement Repeat Selection 1-1-74
z
+AR
Second Delay Announcement Repeat Interval Time Selection 1-1-75
z
+AR
VRS Message Recording Time Selection 1-8-12
z
+AR  VRS Message Function Assignment
1-8-13
z
+AR
 Delay Announcement Assignment
3-41
Note 1: To record the Delay Announcements:
First Announcement
– Dial Access Code  Dial A  Dial C  Dial A
(Access Codes are set in Memory Blocks 1-1-46, 1-1-47, or 1-1-48)
Second Announcement
– Dial Access Code  Dial A  Dial C  Dial B
(Access Codes are set in Memory Blocks 1-1-46, 1-1-47, or 1-1-48)
Note 2: Requires an MIFA-U( ) ETU or MIFM-U( ) ETU before the Memory Block can be programmed.
Note 3: Incoming analogue trunks must provide Reversal On Idle and Reversal On Answer signalling for correct
logging of abandoned calls.
Delayed Ringing
Menu Access
Keyboard Shortcut
System Data Name Memory Block
z
+BCM
 Delayed Ringing Timer Assignment (CO)
1-1-77
z
+BI
Delayed Ringing Timer Assignment (ICM) 1-2-26
z
+BTT
CO/PBX Ring Assignment (Day Mode) 4-01
z
+BTT
CO/PBX Ring Assignment (Night Mode) 4-02
z
+BTM
Line Selection for Telephone Mode 4-12
z
+BTM
Extension Line Key Ring Assignment (Day Mode) 4-37
z
+BTM
Extension Line Key Ring Assignment (Night Mode) 4-38