286 – Chapter 1 DRAFT 3 ACR Route Table Number Assignment, 1-14-03
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0
December 2004
1-14-03
System Mode
1
Submode
14
Data No.
03
PC Programming
+ AO
ACR Route Table Number
Assignment
General Description
Use this Memory Block to assign each ACR Dialling Assignment to an ACR Route Assignment.
Display
Programming Procedures
1
Go off-line.
2
Press LK1 + LK14 + LCto access the Memory Block.
3
Use dial pad keys to select Table number (1~4), Dial number (01~C8), and Route number (01~32).
Use dial pad keys
K~I to select Data
Note: Use Jto move cursor left.
Use
Lto move cursor right.
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
3-03 Trunk-to-Trunk Group Assignment
4-40 LCR Class Selection
1-8-08 Class of Service (Station) Feature Selection 2
1-14-00 ACR Feature Allow/Deny Selection
1-14-01 ACR Dialling Assignment
1-14-01 ACR Dialled Number Dial Allow/Deny Selection
1-14-03 ACR Trunk Group to Route Number Assignment
1-14-05 ACR Digit Add Assignment
1-14-04 ACR Digit Delete Assignment
N
1. Entries A0~C8 are 100~128.
2. If ACR Route Assignment 00 is selected, the call is sent to Trunk Group 01 exactly as it was dialled.
0 3 : 1 / 0 1 R O U T E 0 0
T I M E D I S P L A Y
Data
No.
Setting
Data
01~C8
Dial
No.
Title
Table
1~4
To Next Page
Loading...
