NEC Xen IPK - System Transfer;Camp-On Selection

44 – Chapter 1 DRAFT 3 System Transfer/Camp-On Selection, 1-1-11
December 2004 NEC Business Solutions Ltd
Doc. No.: 8194 - Release 2.0 December 2004
1-1-11
System Mode
1
Submode
1
Data No.
11
PC Programming
+ BTS
System Transfer/Camp-On
Selection
General Description
Use this Memory Block to allow or deny (system-wide) station users the ability to perform a Ring
Transfer or Station Camp-On. If allowed, Multiline Terminal users can perform a Ring Transfer by
pressing the Transfer key.
With IPK R2000 and above, this memory block allows flexible entries and has four classes.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
No
Yes
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1
Go off-line.
2
Press LK1 + LK1 + AA to access the Memory Block.
3
Press the corresponding CO/PBX line key to change the data option.
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-12 Station Transfer/Camp-On Recall Timer Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
Transfers or camp-ons from Attendant Add-On Consoles are also activated using this Memory Block.
1 1 : R I N G T R F Y S
T I M E D I S P L A Y
Data
No. Title
Setting
Data