NEC Xen IPK - Toolbar

Xen IPK Programming Manual
Section 6, Toolbar DRAFT 3 Chapter 3 – 605
Doc. No.: 8194 - Release 2.0 December 2004
SECTION 6
TOOLBAR
Several icons are provided to allow the user to navigate the program. The
icons in the toolbar are explained in this section. The availability of the
individual tools depends on the activity the user is performing. When the
icon appears shadowed, the tool is not available. When the icon is dark, the
tool is available. Refer to Figure 3-4: Xen IPK Maintenance Access Terminal
Software Screen Samples for an example.
Creates a new customer configuration file.
Loads or opens an existing customer configuration file.
Saves the customer configuration file to the hard disk,
or floppy disk.
Accesses the Job Specifications printing option.
Accesses the
Wizard for individual features.
Sets the defaults for
all items on the open tab.
Sets the defaults for the individual system data items
(on the screen the default is set for the item where the
cursor is blinking).
Allows data items to be copied between ports.
Allows values between two ports to be swapped.
Allows the user to undo the current edits and return to
the previous editing operation.
Takes you to the previous tab.