NEC Xen IPK - Figure 1-4: Page Switching for Data Values

Xen IPK Programming Manual
Programming Manual DRAFT 3 Chapter 1 – 9
Doc. No.: 8194 - Release 2.0 December 2004
Figure 1-4: Page Switching for Data Values shows an example
of 10 data values. Values are displayed on two pages.
2.5.5 Station Port Numbering Plan
Some memory blocks require entering a 2-digit port number.
The Xen IPK system supports 48/120 ports. Programming
values for entry of Port Assignments are defined below:
Figure 1-4: Page Switching for Data Values
Port Assignments Programming Value
01~99 01~99
100~109 A0~A9
110~119 B0~B9
120 C0
To enter an A, B, or C, press
Q+1, 2, or 3.
(Page 1)
LK 1 LK 2 LK 3 LK 4
Data 1 Data 2 Data 3 Data 4
LK 5 LK 6 LK 7 LK 8
Data 5 Data 6 Data 7 Data 8
16-Key Multiline Terminal
(Page 2)
LK 9 LK 10 LK 11 LK 12
Data 9 Data 10
LK 13 LK 14 LK 15 LK 16
LCD Display:
00 to indicate Page 1
LCD Display:
02 to indicate Page 2