NEC Xen IPK - Page 148

December 2004 NEC Business Solutions Ltd
128 – Chapter 1 DRAFT 3 Internal Paging Timeout Selection, 1-2-00
Doc. No.: 8194 - Release 2.0 December 2004
3
Use the dial pad to enter the time required.
Note:
Jto move cursor left.
Lto move cursor right.
Setting Data (Allow): Class 1 to Class 4: 000 to 255 sec
000 = No Limit
NOTE: CCIS Network Class 1 is used.
Default values:
Class 1 to Class 4 = 10 secs
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-7-06 External Paging Timeout Selection
4-90 Internal Zone Paging Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
The six types of paging are:
 All Internal Zone (51)
 Internal Zone Paging (52~54)
 External Zone Paging (all speakers) (55)
 External Zone Paging (individual speakers) (56~58)
 Internal/External Zone Paging (59)
Programming Procedures (Continued)