Xen IPK Programming Manual
1-15-06, Originating Office Code Number Assignment DRAFT 3 Chapter 1 – 303
Doc. No.: 8194 - Release 2.0
December 2004
1-15-11 Centralised Billing Allow/Deny Selection
1-15-12 Centralised Billing – Point Code of Center Office Assignment
1-15-13 Centralised Day/Night Switching for Remote Office Assignment
1-15-14 Centralised Day/Night Switching for Main Office Assignment
1-15-15 Centralised BLF Send Point Code Assignment
1-15-16 Centralised BLF Send Extension Number Assignment
1-15-17 Centralised BLF Send Time Assignment
1-15-18 Centralised BLF Display Extension Number Assignment
3-70 CIC Number Assignment
5-05 Common Signalling Channel Route Selection
1-1-05 Start Time Selection
1-5-02 SMDR Print Format
1-5-13 Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
N
The maximum number of digits that can be deleted cannot exceed the number of digits used to route the call.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
