Xen IPK Programming Manual
1-15-10, Calling Name Display Allow/Deny Selection DRAFT 3 Chapter 1 – 311
Doc. No.: 8194 - Release 2.0
December 2004
1-15-12 Centralised Billing – Point Code of Center Office Assignment
1-15-13 Centralised Day/Night Switching for Remote Office Assignment
1-15-14 Centralised Day/Night Switching for Main Office Assignment
1-15-15 Centralised BLF Send Point Code Assignment
1-15-16 Centralised BLF Send Extension Number Assignment
1-15-17 Centralised BLF Send Time Assignment
1-15-18 Centralised BLF Display Extension Number Assignment
3-70 CIC Number Assignment
5-05 Common Signalling Channel Route Selection
1-1-05 Start Time Selection
1-5-02 SMDR Print Format
1-5-13 Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
N
1. This Memory Block determines whether or not the station name is sent to the distant system.
2. This Memory Block is not used with and has no effect on the IP (K-CCIS) feature.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
