Xen IPK Programming Manual
1-15-17, Centralised BLF Send Time Assignment DRAFT 3 Chapter 1 – 325
Doc. No.: 8194 - Release 2.0
December 2004
1-15-10 Calling Name Display Allow/Deny Selection
1-15-11 Centralised Billing Allow/Deny Selection
1-15-12 Centralised Billing – Point Code of Center Office Assignment
1-15-13 Centralised Day/Night Switching for Remote Office Assignment
1-15-14 Centralised Day/Night Switching for Main Office Assignment
1-15-15 Centralised BLF Send Point Code Assignment
1-15-16 Centralised BLF Send Extension Number Assignment
1-15-18 Centralised BLF Display Extension Number Assignment
3-70 CIC Number Assignment
4-12 Line Key Selection for Telephone Mode
4-17 Station to Class of Service Feature Selection
5-05 Common Signalling Channel Route Selection
N
The BLF messages are sent in a four-second cycle (at default), so some delay occurs to change the
indication in the destination office. In the network configured with two systems, it can take four to five
seconds (at default) to change the BLF indication in the destination office.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
