Xen IPK Programming Manual
1-15-18, Centralised BLF Receive Extension Number Assignment DRAFT 3 Chapter 1 – 327
Doc. No.: 8194 - Release 2.0
December 2004
1-15-06 Originating Office Code Number Assignment
1-15-07 K-CCIS Message Response Timeout Assignment
1-15-08 Link Reconnect Allow/Deny Selection
1-15-09 K-CCIS Maximum Call Forwarding Hop Assignment
1-15-10 Calling Name Display Allow/Deny Selection
1-15-11 Centralised Billing Allow/Deny Selection
1-15-12 Centralised Billing – Point Code of Center Office Assignment
1-15-13 Centralised Day/Night Switching for Remote Office Assignment
1-15-14 Centralised Day/Night Switching for Main Office Assignment
1-15-15 Centralised BLF Send Point Code Assignment
1-15-16 Centralised BLF Send Extension Number Assignment
1-15-17 Centralised BLF Send Time Assignment
3-70 CIC Number Assignment
4-12 Line Key Selection for Telephone Mode
4-17 Station to Class of Service Feature Assignment
5-05 Common Signalling Channel Route Assignment
N
1. Up to 120 remote Telephone’s BLF can be received per system.
2. All Multiline Terminals in the system can assign DSS/BLF keys for the supported remote telephone’s BLF.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
