NEC Xen IPK - Page 66

December 2004 NEC Business Solutions Ltd
46 – Chapter 1 DRAFT 3 Station Transfer/Camp-On Recall Timer Selection, 1-1-12
Doc. No.: 8194 - Release 2.0 December 2004
3
Use the dial pad to enter the time required.
Note:
Jto move cursor left.
Lto move cursor right.
Setting Data (Allow): Class 1 to Class 4: 000 to 999
sec
000 = No
Limit
Default values:
Class 1 to Class 4 = 060 secs
4
PressNto write the data.
5
PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-11 System Transfer/Camp-On Selection
1-6-05 Attendant Add-On Console Key Selection
1-8-08 Class of Service (Station) Feature Selection 2
1-1-64 Attendant Add-On Console Transfer/Camp-On Recall Timer Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
When a station with an Attendant Add-On Console assigned to it transfers or camps on a call and the call goes
unanswered, the call recalls using Memory Block 1-1-64 Attendant Add-On Console Transfer/Camp-On Recall Timer
Selection.
Programming Procedures (Continued)