Siemens SCALANCE W1750D CLI - G-Channel; G-Ant-Pol

CLI Commands
4.7 G
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
113
4.7 G
4.7.1 g-channel
Description
This command configures 2.4 GHz radio channels for a specific AP.
Syntax
g-channel <channel> <tx-power>
Parameter
Description
Range
<channel>
Configures the specified 2.4 GHz
channel.
The valid channels for a band are determined
by the AP regulatory domain.
<tx-power>
Configures the specified transmission
power values. It also supports 0.1 dBm
and negative values.
-51 dBm to 51 dBm
Usage Guidelines
Use this command to configure radio channels for the 2.4 GHz band for a specific AP.
Example
The following example configures the 2.4 GHz radio channel:
(scalance)# g-channel 11 18
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.7.2 g-ant-pol
Description
This command configures the antenna polarization value for 2.4 GHz radio channels.