Siemens SCALANCE W1750D CLI - Show Ble-Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
413
--- ------ --------- ------------------- -------
Dyn Blacklist Count :0
The output of this command provides the following information:
Parameter
Description
Blacklist Time
Indicates the duration in seconds since the blacklisting has been triggered
due to an ACL rule.
auth-survivability
cache-time- out
Indicates the duration in seconds after which the clients that exceed the
maximum authentication failure threshold are blacklisted.
Manually Blacklist-
ed clients
Displays the details of clients that are blacklisted manually.
Dynamically Black-
listed Clients
Displays the list of clients that dynamically blacklisted due to multiple au-
thentication rules or an ACL rule trigger.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.99 show ble-config
Description
This command displays the BLE configuration details.
Syntax
show ble-config
Parameter
Description
ble-config
Displays the BLE configuration details.
Usage Guidelines
Use this command to view the BLE configuration.
Example
The following example shows the output of the show ble-config command:
(scalance)# show ble-config
BLE Configuration
-----------------
Item Value