Siemens SCALANCE W1750D CLI - Mesh-Disable; Mgmt-Accounting

CLI Commands
4.11 M
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
201
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.11.6 mesh-disable
Description
This command disables the mesh functionality in an AP.
Syntax
mesh-disable
no…
Parameter
Description
no…
Removes the configuration settings.
Example
The following example disables the mesh functionality AP:
(scalance)# mesh-disable
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.11.7 mgmt-accounting
Description
This command is used to enable accounting privileges on TACACS+ servers for
management users.
Syntax
mgmt-accounting command all