Siemens SCALANCE W1750D CLI - Debug-Rtls-Logs; Deny-Inter-User-Bridging

CLI Commands
4.4 D
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
85
4.4 D
4.4.1 debug-rtls-logs
Description
This command generates debugging logs for the RTLS tags.
Syntax
debug-rtls-logs
no…
Usage Guidelines
Use this command to generate debugging logs for the RTLS tags. The generated logs can
be viewed by using the
show rtls-logs command.
Example
The following example disables the default provisioning SSID:
(scalance)# debug-rtls-logs
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.4.2 deny-inter-user-bridging
Description
This command disables bridging traffic between two clients of an AP on the same VLAN.
Bridging traffic between the clients will be sent to the upstream device to make the
forwarding decision.
Syntax
deny-inter-user-bridging