Siemens SCALANCE W1750D CLI - Show Log Scd

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
539
Syntax
show log sapd <count>
Parameter
Description
<count>
Starts displaying the log output from the specified number of lines from the
end of the log.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.170 show log scd
Description
This command displays the status of the Serial Communication Daemon process.
Syntax
show log scd [count]
Parameter
Description
count
Displays a count of the SCD requests.
Example
The following example displays the output of the show log scd command:
[5998]2018-05-24 07:21:21 ReplyBatch: packetLength= 1833, data.length= 1837,
templateLength = 114, requestCount = 16!
[5998]2018-05-24 07:21:22 Received slot request = 353, replyStatus = 0!
[5998]2018-05-24 07:21:22 Received slot request = 354, replyStatus = 0!
[5998]2018-05-24 07:21:22 Got Alive-Ping message header.
[5998]2018-05-24 07:21:22 PacketMaxLength = 1160!
[5998]2018-05-24 07:21:22 Handling SYNC packet read
[5998]2018-05-24 07:21:22 Accepting SYNC packet
[5998]2018-05-24 07:21:22 Adding SYNC with slotId = 368!
[5998]2018-05-24 07:21:22 Adding SYNC with slotId = 369!
[5998]2018-05-24 07:21:22 Adding SYNC with slotId = 370!