Siemens SCALANCE W1750D CLI - Dpi

CLI Commands
4.4 D
SCALANCE W1750D CLI
94 Function Manual, 03/2019, C79000-G8976-C452-04
4.4.12 dpi
Description
This command enables visualization of traffic from wired and wireless clients associated with
an AP.
Syntax
dpi
no…
Parameter
Description
dpi
Enables AppRF feature.
no…
Removes the configuration.
Usage Guidelines
Use this command to enable AppRF visibility for wired and wireless clients associated with
an AP. AppRF supports an application and web-filtering service that allows creating firewall
policies based on types of application. AppRF includes the following capabilities:
● Access control, QoS, and bandwidth contract rules based on application and application
categories.
● Content filters based on web categories and reputation scores (security ratings).
For more information on access rule configuration and web-filtering options, see the
Configuration Manual “ SCALANCE W UI” and the wlan access-rule command page.
Example
The following command configures DPI support:
(scalance)(config)# dpi
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode