Siemens SCALANCE W1750D CLI - Show Time-Profile

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
593
4.16.213 show time-profile
Description
This command displays all the time range profiles, the respective SSIDs and access rules on
which they are applied, and the status (enabled or disabled).
Syntax
show time-profile
Usage Guidelines
Use this command to view the list of time profiles created on the AP.
Example
The following example shows the output of the show time-profile command:
Time Range SSID Profile
-----------------------
Time Profile Name
SSID profile Name
Enable/Disable
-----------------
-----------------
--------------
Lunch Break
Test123
Enable
Time Range ACL Profile
----------------------
Time Profile Name
Access Role Name
Rule
-----------------
----------------
----------------
Evening_5_7
sandeepy
any any match any any any
permit
time-range hel-
lo world
The output of this command provides the following information:
Parameter
Description
Time Profile Name
Name of the time profile.
SSID Profile
The WLAN SSID profiles for which the time profile is applied.
Enable/Disable
Status of the time range profile on the SSID.
Rule
Displays the access rule configuration.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode