Siemens SCALANCE W1750D CLI - Name; Ntp-Server

CLI Commands
4.12 N
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
207
4.12 N
4.12.1 name
Description
This command configures a unique name for the AP.
Syntax
name <name>
Parameter
Description
name <name>
Configures a name for the AP or the Virtual Controller.
Usage Guidelines
Use this command to configure a name for the AP:
Example
The following example configures a name for the AP:
(scalance)# hostname <system-name>
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.12.2 ntp-server
Description
This command configures NTP server for an AP.
Syntax
ntp-server <Name>