Siemens SCALANCE W1750D CLI - Show Snmp-Configuration

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
573
failover-internet-pkt-send-freq 30
failover-vpn-timeout 180
airgroup
disable
airgroupservice airplay
disable
description AirPlay
airgroupservice airprint
disable
description AirPrint
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.200 show snmp-configuration
Description
This command displays the SNMP configuration details for a Virtual Controller.
Syntax
show snmp-configuration
Usage Guidelines
Use this command to view the SNMP information configured on a Virtual Controller.
Example
The following example shows the output of show snmp-configuration command:
Engine ID:D8C7C8CBD420
Community Strings
-----------------
Name
----
Test