Siemens SCALANCE W1750D CLI - Dhcp

CLI Commands
4.4 D
SCALANCE W1750D CLI
88 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.4.5 dhcp
Description
This command is used to configure the DHCP option 82 parameters present in the XML file
into the datapath.
Syntax
dhcp option82-xml <string>
no…
Parameter
Description
dhcp option82-xml <string>
Indicates the XML file from which DHCP option 82 needs to be
configured.
no ...
Removes the DHCP option 82 XML based configuration.
Example
The following command configures DPI support:
(scalance)(config)# dhcp option82-xml file
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode