Siemens SCALANCE W1750D CLI - Show Ap Debug Radius-Statistics

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
359
The output of this command provides the following information:
Column
Description
Parameter
Displays the transmission and reception parameters.
Value
Displays the values associated with the transmission and reception param-
eters.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.67 show ap debug radius-statistics
Description
This command displays the RADIUS statistics for the authentication servers configured on
an AP.
Syntax
show ap debug radius-statistics [termination]
Usage Guidelines
Use this command to view the authentication server details.
Example
The following example displays the output of the show ap debug radius-statistics command:
RADIUS Statistics
-----------------
Statistics
TerminationServer
InternalServer
testserver
test1234
----------
-----------------
--------------
----------
--------
In Service: Management
Auth
Not used
Not used
Not used
Not used
In Service: Example1 Not
used
Up
67920s
Not
used
Not used
Accounting Requests 0
0
0
0
Raw Requests 0
0
0
0
PAP Requests 0
0
0
0
CHAP Requests 0
0
0
0
MS-CHAP Requests 0
0
0
0
MS-CHAPv2 Requests 0
0
0
0
Mismatch Response 0
0
0
0