Siemens SCALANCE W1750D CLI - Show Log Apifmgr; Show Log Convert; Show Log Debug

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
531
4.16.156 show log apifmgr
Description
This command shows the log information for AP interface manager.
Syntax
show log apifmgr <count>
Parameter
Description
count
Starts displaying the log output from the specified number of lines from the end
of the log.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.157 show log convert
Description
This command shows image conversion details for the AP.
Syntax
show log convert
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.158 show log debug
Description
This command shows the AP full log.