Siemens SCALANCE W1750D CLI - Show Network-Summary

CLI Commands
4.16 S
SCALANCE W1750D CLI
550 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.183 show network-summary
Description
This command displays the status of the available network configurations on the AP.
Syntax
show network-summary
Usage Guidelines
Use this command to view the status of the network configurations.
Example
The following output is displayed for the show network-summary command:
Internet reachable :Detection disabled
Active uplink :eth0
Primary VPN :Not configured
Secondary VPN :Not configured
AirWave :Not configured
The output of this command provides the following information:
Column
Description
Internet Reachable
Indicates the status of the WLAN network.
Active uplink
Indicates the uplink that is currently active on the
AP.
Primary VPN
Indicates the status of the Primary VPN configu-
ration.
Secondary VPN
Indicates the status of the Secondary VPN con-
nection.
Airwave
Indicates the status of the AirWave configuration.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode