Siemens SCALANCE W1750D CLI - Managed-Mode-Profile

CLI Commands
4.11 M
SCALANCE W1750D CLI
196 Function Manual, 03/2019, C79000-G8976-C452-04
When an AP is integrated with a Mobility Access Switch, the Link Layer Discovery Protocol
(LLDP) is enabled. Using this protocol, the APs instruct the Mobility Access Switch to turn off
the ports where rogue APs are connected, perform actions such as increasing the PoE
priority, and configure the VLANs on the ports to which the APs are connected.
Example
The following example enables Mobility Access Switch integration for an AP:
(scalance)(config)# mas-integration
(scalance)(config# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.11.2 managed-mode-profile
Description
This command is used to enable auto configuration of the APs in the management mode.
Syntax
managed-mode-profile
automatic
config-filename <filename>
debug-managed-mode
download-method <method>
retry-poll-period <time-in-sync>
server <server name>
sync-time day <dd> | hour <hh> | min <mm> | window <window>
username <username>
password <password>