Siemens SCALANCE W1750D CLI - Show Ap Debug Client-Table

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
337
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.53 show ap debug client-table
Description
This command shows the clients associated with an AP.
Syntax
show ap debug client-table
Usage Guidelines
Use this command to view a list of AP clients
Example
The following example shows the output of show ap debug client-table command:
Client Table
------------
MAC ESSID BSSID Assoc_State HT_State AID PS_State -------- ----- ----------- --------
--- ----
----
08:ed:b9:e1:51:7d example1 d8:c7:c8:3d:42:12 Associated WSsM 0x1 Awake
UAPSD Tx_Pkts Rx_Pkts PS_Qlen Tx_Retries Tx_Rate Rx_Rate Last_ACK_SNR
----- ------ ------- ------- ---------- ------- ------- ------------
(0,0,0,0,N/A,0) 101 12888 0 0 300 300 45
-----------
Last_Rx_SNR TX_Chains Tx_Timestamp Rx_Timestamp MFP Status (C,R)
--------- ------------ ---------- ---------------- ----------------
50 3[0x7] Sun May 12 07:41:25 2013 Sun May 12 07:42:13 2013 (0,0)
UAPSD:(VO,VI,BK,BE,Max SP,Q Len)
HT Flags: A - LDPC Coding; W - 40Mhz; S - Short GI HT40; s - Short GI HT20