Siemens SCALANCE W1750D CLI - Show Ap Debug Ble-Relay

CLI Commands
4.16 S
SCALANCE W1750D CLI
324 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Privileged Exec mode
4.16.47 show ap debug ble-relay
Description
This command displays the BLE process logs.
Syntax
show ap debug ble-relay [disp-attr | iot-profile | jobs [<profile>] | report
[<profile>] | tag-report [<profile>] | ws-log [<profile>]]
Usage Guidelines
Use this command to view the BLE process logs.
Examples
The following command displays the values of various settings related to an asset tag
reporting:
(scalance)# show ap debug ble-relay disp-attr
WebSocket Connect Request
: Yes
WebSocket Connect Status
: 3
WebSocket Connection Established
: Yes
WebSocket LogLevel
: 0
Tag Logging
: Off
Websocket Address
: beacons.meridianapps.com
WebSocket Host
: beacons.meridianapps.com
WebSocket Path
: /ingestion/ingest
=============================
Note: Websocket Loglevel List: Error (0x1), Warn (0x2), Notice (0x4), Info (0x8),
Debug (0x10), Parser (0x20), Header (0x40), Ext (0x80), Client (0x100), Latency
(0x200).
The following command displays the BLE tag data for the AP:
(scalance)# show ap debug ble-relay tag-report
Incoming Tag messages
65102
Tag messages processed :
5114
Tag messages dropped :
59988
Tag messages WS queue success
5114
Tag messages WS queue unavailable
4359
Tag messages WS not connected
55629
Tag messages WS sent
5114
The following command displays the WebSocket logs of the AP: