Siemens SCALANCE W1750D CLI - Show Ip Interface

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
517
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.147 show ip interface
Description
This command displays a summary of IP related information for all interfaces configured on
an AP.
Syntax
show ip interface
brief
detail
Usage Guidelines
Use this command to view a brief summary of IP related information for the AP interfaces.
Example
The following output is displayed for the show ip interface brief command:
Interface IP Address / IP Netmask Admin Protocol
br0 10.17.88.188 / 255.255.255.192 up up
The output of the
show ip interface brief command provides the following information
Column
Description
Interface
Lists the interface and interface identification, where applicable.
IP Address /IP Netmask
Lists the IP address and subnet mask for the interface.
Admin
Displays the administrative status of the interface.
• Enabled—up
• Disabled—down
Protocol
Displays the status of the IP on the interface.
• Enabled—up
• Disabled—down
The following output is displayed for the show ip interface detail command:
ifname : br0
--------------------