Siemens SCALANCE W1750D CLI - Show Network

CLI Commands
4.16 S
SCALANCE W1750D CLI
548 Function Manual, 03/2019, C79000-G8976-C452-04
Column
Description
Hash Management Password
Indicates if hashing of management user password is enabled or
disabled.
Name
Indicates the name of the RADIUS server.
IP address
Indicates the IP address of the RADIUS server.
Port
Indicates the authorization port number of the RADIUS server.
Key
Indicates the key for communicating with the RADIUS server.
Timeout
Indicates timeout value in seconds for one RADIUS request.
Retry count
Indicates the maximum number of authentication requests sent
to the RADIUS server.
NAS IP address
Displays the IP address of the NAS if NAS is configured.
NAS Identifier
Indicates the NAS identifier to be sent with the RADIUS requests
if NAS is configured.
In Use
Indicates if the server is in use.
RFC3576
ndicates if the APs are configured to process RFC 3576- compli-
ant CoA.
NAS IP address
Displays the IP address of the NAS if NAS is configured.
Name (Management User Table)
Indicates the username of the admin user
Password
Indicates the password of the admin user.
Type
Indicates if the type of the user (admin, read-only, or guest man-
agement user).
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.182 show network
Description
This command shows network configuration details for an AP.
Syntax
show network <name>
Parameter
Description
<name>
Displays the name of a network profile.