Siemens SCALANCE W1750D CLI - Show Ap Debug Auth-Trace-Buf

CLI Commands
4.16 S
SCALANCE W1750D CLI
320 Function Manual, 03/2019, C79000-G8976-C452-04
---
Valid and Protected SSIDs
--------------------------
SSID
--------
8eb3ef208a601c64298ff25613597568.3-L2-ACL
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.43 show ap debug auth-trace-buf
Description
This command displays the trace buffer for authentication events associated with the AP.
Syntax
show ap debug auth-trace-buf <count> [<Mac>]
Parameter
Description
<count>
Displays the count of trace buffer authentication events
<Mac>
Displays the authentication trace information for a specific MAC address.
Usage Guidelines
Use the output of this command to troubleshoot authentication errors. Include the <MAC>
parameter to filter data by the MAC address of the client to view specific details.
Example
The following example shows the output of show ap debug auth-trace-buf <count> command:
Auth Trace Buffer
-----------------
May 10 13:05:09 station-up * ac:81:12:59:5c:12 d8:c7:c8:3d:42:13 - - wpa2 psk aes
May 10 13:05:09 wpa2-key1 <- ac:81:12:59:5c:12 d8:c7:c8:3d:42:13 - 117
May 10 13:06:30 station-up * 08:ed:b9:e1:51:7d d8:c7:c8:3d:42:12 - - wpa2 psk aes
May 10 13:06:30 wpa2-key1 <- 08:ed:b9:e1:51:7d d8:c7:c8:3d:42:12 - 117
May 10 13:06:30 wpa2-key2 -> 08:ed:b9:e1:51:7d d8:c7:c8:3d:42:12 - 117
May 10 13:06:30 wpa2-key3 <- 08:ed:b9:e1:51:7d d8:c7:c8:3d:42:12 - 151