Siemens SCALANCE W1750D CLI - Show Gre Status

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
503
GRE Ping Retry Count 3
GRE Reconnect User On Failover :enable
GRE Reconnect Time On Failover :60 (secs)
Parameter
Description
GRE Primary Server
Displays the primary GRE Server information.
GRE Primary IP
Displays the primary GRE IP address.
GRE Backup Server
Displays the backup GRE Server information.
GRE Backup IP
Displays the backup GRE IP address.
GRE Type
Displays the GRE type.
GRE Per AP Tunnel
Denotes if the per-ap tunnel is enabled or disabled.
GRE Preemption
Denotes if the preemption is enabled or disabled.
GRE Holdon Time
Denotes the hold down time (in seconds) before which the GRE tunnel
recovers from the backup to the primary tunnel.
GRE Failover type
Displays the GRE failover type.
GRE Ping Interval
Displays the ping interval configured.
GRE Allowed Inactive
Time
Displays the time for tunnel inactivity check
GRE Ping Retry Count
Displays the ping count for bringing the tunnel DOWN.
GRE Reconnect User On
Failover
Displays the time (in seconds) after which the user will try to reconnect.
GRE Reconnect Time On
Failover
Denotes if the reconnect user on tunnel failover is enabled or disabled.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.137 show gre status
Description
This command displays the various parameters indicating the status of GRE.
Syntax
show gre status
Usage Guidelines
Use this command to view the GRE status on an AP.