Siemens SCALANCE W1750D CLI - Zonenmane

CLI Commands
4.22 Z
SCALANCE W1750D CLI
724 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.22.2 zonenmane
Description
This command configures a zone name for the AP. You can configure zone settings on an
AP and the SSID profile, to assign an SSID to a specific AP.
Syntax
zonename <name>
no…
Parameter
Description
zonename <name>
Configures zone on an AP. You can configure up to six SSID zones per AP,
and up to 32 SSID zones per ssid-profile. Use comma separators when
listing multiple zones.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure anAP zone. To assign an SSID to a specific AP, the AP zone
name must be configured on the WLAN SSID profile.
The following constraints apply to the AP zone configuration:
● An AP can belong to six zones and only six zones can be configured on an SSID.
● If an SSID belongs to a zone, all APs in this zone can broadcast this SSID. If no AP
belongs to the zone configured on the SSID, the SSID is not broadcast.
● If an SSID does not belong to any zone, all APs can broadcast this SSID.
Example
The following example configures a zone name on an AP:
(scalance)# zonename zoneA
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode