Siemens SCALANCE W1750D CLI - Show Log User-Debug; Show Log Vpn-Tunnel-Primary

CLI Commands
4.16 S
SCALANCE W1750D CLI
542 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.175 show log user-debug
Description
This command shows the AP user debug logs.
Syntax
show log user-debug [count]
Parameter
Description
count
Starts displaying the log output from the specified number of lines from the
end of the log.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.176 show log vpn-tunnel-primary
Description
This command shows the primary VPN tunnel status for the AP
Syntax
show log vpn-tunnel-primary
Parameter
Description
primary tunnel
Displays the log output from the primary VPN tunnel.
Usage Guidelines
Use this command to view a table of a primary VPN tunnel status.
Example
The following example shows the output of show log vpn-tunnel-primary command:
2017-04-19 10:07:49 [primary tunnel] cli_proc_rapper_msg(852): Receive rapper msg
from 8423 port.
2017-04-19 10:07:49 [primary tunnel] Error!!!: Received RC_OPCODE_ERROR lms
10.17.132.51