Siemens SCALANCE W1750D CLI - Ale-Server

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
39
no
…
Parameter
Description
Range
Default
ale-report-
interval
<seconds>
Configures an interval at which the Virtual Controller can
report the AP and client details to the ALE server.
6–60
seconds
30
no…
Removes the specified configuration parameter.
—
—
Usage Guidelines
Use this command to specify an interval for AP and ALE server communication.
Example
The following example configures the ALE server details:
(scalance)(config)# ale-report-interval 60
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.1.13 ale-server
Description
This command configures ALE server details for AP integration with ALE.
Syntax
ale-server <server>
no…
Parameter
Description
ale-server <serv-
er>
Allows you to specify the FQDN or IP address of the ALE server.
no…
Removes the specified configuration parameter.
Usage Guidelines
Use this command to enable an AP for ALE support.
Example
The following example configures the ALE server details: