Siemens SCALANCE W1750D CLI - Show Openflow

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
551
4.16.184 show openflow
Description
This command displays the configuration information about an OpenFlow controller, flow list,
and clickstream statistics
Syntax
show openflow {clickstream-statistics | controller [detail] | flow-table | syslog-statistics}
Parameter
Description
clickstream-statistics
controller
Indicates the clickstream statistics information. Indi-
cates the IP address of the OpenFlow Controller.
detail
Displays information about OpenFlow connection, TLS
status, interface list, and OpenFlow ports to the Open-
Flow Controller.
flow-table
Displays the list of flows installed by OpenFlow con-
troller on the OpenFlow agent.
syslog-statistics
Displays the current syslog configuration that shows
the syslog configuration file and the statistics relat-
ed to syslog packets sent to the cloud server.
Example
The following example displays the output of the show openflow clickstream-statistics
command
Last CS feed flush timestamp: 08:43:16
Last CS data flush count: 16
Last CS data flush size: 16275
CS ring buffer size threshold limit: 16384 bytes
OFALD CS debug: disabled
Datapath CPU throttle stats: max percent (60) current drop (0)
Kernel SKB total count: 51 Kernel SKB error count: 0
Current CS data count: 17
Current CS data size: 15876 bytes
Current CS free space: 508 bytes
The following example displays the output of the
show openflow controller command
Controller IP: 15.184.8.246, port:30633, State: Msg recv wait, SSL: False
Rap config:1, status:0 Openflow Interface List
IF MAC:94:b4:0f:8c:de:f0, port_no:8464, name:aruba000, oflow_index:0
OpenFlow MAC Bridge List OpenFlow Dynamic Tunnel List
The following example displays the output of the
show openflow flow-table command:
Flow: <Add at Sun Jun 18 09:19:49 2017><bytes:0, pkts:0, idletmo:0, hardtmo:0
last:1497777589> Match:<17, 222.173.190.239, 186.173.202.254, 60000, 60000>