Siemens SCALANCE W1750D CLI - Show Audit-Trail

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
407
4.16.94 show audit-trail
Description
This command displays the history of the trail logs generated from the configuration
commands.
Syntax
show audit-trail <count>
Example
The following example shows the output of the show audit-trail command:
time
From
-------------------
------------
21.03.2017 02:22
from Cli
21.03.2017 02:22
from Cli
21.03.2017 02:22
from Cli
21.03.2017 02:22
from Cli
21.03.2017 02:22
from Cli
21.03.2017 02:22
from Cli
21.03.2017 02:22
from Cli
Command
---------------------------------------------------------------------
<f0:5c:19:c9:f9:6c (SSID Profile "liying-TP2-1") # no explicit-ageout-
client> -- successfully.
<f0:5c:19:c9:f9:6c (config) # exit> -- successfully.
<f0:5c:19:c9:f9:6c (Access Rule "liying-TP2-1") # wlan access-rule liying-
TP2-1> -- successfully.
<f0:5c:19:c9:f9:6c (Access Rule "liying-TP2-1") # no rule> -- successfully.
<f0:5c:19:c9:f9:6c (Access Rule "liying-TP2-1") # bandwidth-limit peruser
downstream 1500> -- successfully.
<f0:5c:19:c9:f9:6c (Access Rule "liying-TP2-1") # rule any any match any any
any permit> -- successfully.
<f0:5c:19:c9:f9:6c (config) # exit> -- successfully.
Parameter
Description
time
Displays the time when the configuration command was executed.
From
Displays the source from which the configuration command was executed
(CLI, WebUI, or other servers)
Command
Displays the configuration details.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode